Cwejman D-LFO Dual-Multi-LFO

CWDLFO

Nowy produkt

Two identical, flexible LFOs with very innovative sync possiblities 
and an enormous frequency range. 
The cherry on top is the amplitude- and ring modulation between the LFOs.

Więcej szczegółów

Na zamówienie

2 695,45 zł brutto.

Share:

Two identical, flexible LFOs with very innovative sync possiblities 
and an enormous frequency range. 
The cherry on top is the amplitude- and ring modulation between the LFOs.
An interesting tool for generating extraordinary waveforms and also very suitable for those somewhat different FM sounds.
Each LFO is voltage controllable, re-triggerable and provides you with seven waveforms – 
two different sample and holds, sine, triangle, falling and rising sawtooth and square.
There´s a switch for two frequency ranges: 40s-0.2s und 0.4s-2ms duration per cycle, 
this means the LFOs go up to 20 kHz and can be also used as VCOs!
The RM/AM outputs ring modulated or amplitude modulated signals of the LFOs 
and thus creates one-of-a-kind modulations.
The second LFO can be synced by the first; the sync-trip-point which can be set manually 
or by a CV defines at which point of the amplitude the synchronisation happens. 
An extraordinary feature!
Additionally each LFO has external trigger AND gate inputs for re-triggering... very cool. 

       technical details
Width: 14HP
       Outputs: 
LFO1 
RM-AM 
LFO2
       Inputs: 
Rate 1 CV 
Sync T (LFO1) 
Sync G (LFO1) 
EXT Input (LFO2) 
Sync Trip Point CV 
Rate 2 CV 
Sync T (LFO2) 
Sync G (LFO2)

Powiązane produkty

The Audio Processor AP-1 is an indispensable module for everybody who wants to process external audio signals in modular systems. The AP-1 provides you with three sections: Pre-amp, envelope follower and compressor
2 891,69 zł
The ATT-4 is a fourfold attenuator with additional offset-switches.  Its primary task is the attenuation of modulations  in case modulation inputs don't have their own attenuators.
1 151,46 zł
The BLD has all components and functions necessary for generating bass, lead and drum sounds but with focus on bass drum sounds.  The BLD contains a main sound generator (Oscillator), a noise generator and modifiers such as low pass filter, amplifier and two transient (contour) generators.
2 965,86 zł
CTG-VC, a single complex voltage controlled transient generator.  The envelope generator provide control voltages that can be used for dynamic change of all voltage controlled parameters, such as; frequency, amplitude, pulse width, cutoff.
2 215,66 zł
The DMF-2 module consists of two identical filters with two modes:  lowpass and a quasi-bandpass which are available simultaneously at separate outputs.
2 638,72 zł
Dual voltage controlled cross-fade mixer. Main purpose is crossfading between original and effect-signal so the module is like an insert with a dry/wet control. But also normal cross-fading between two different sound sources is somehow possible.
2 028,14 zł
If You don't want scratches on Your modules , You'll need this!  ⌀  3M washers.
21,64 zł

Klienci którzy zakupili ten produkt kupili również:

Przejdź do góry