Erica Synths Pico Drum programmer

Nowy produkt

If you wish to upload your own drum samples to Pico DRUM module, you’ll need Pico DRUM programmer. Reffer to Pico DRUM user manual for sample upload instructions! If you order 3 or more Pico DRUM modules, you’ll get programmer for free

Więcej szczegółów

dostawa 4 dni robocze

103,80 zł brutto.

Share:

!NB! If you are experiencing connection problems, please install VCP drivers for the Pico Programmer from this webpage: http://www.ftdichip.com/Drivers/VCP.htm
Please refer to Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser, see in the link section below. Miscellaneous:
An USB cable is not included.
        Connectors
5 pin header connects with the module, USB header connects with the computer.
Weight   0.07 kg

Powiązane produkty

Unique design VCO with built in waveshape mixer, transistor-based sub-oscillator and XMOD for audio rate frequency modulation
1 375,41 zł
Unique design VCO with built in waveshape mixer, transistor-based sub-oscillator and detune function for +-2 semitones
1 375,41 zł
If you wish to shape the sound in advanced ways and you also want to save some rack space then Black Quad VCA is what you need!
1 012,10 zł
Broad function LFO module. It has 6 waveforms and S&H, frequency divider/multiplier, tap-tempo and built in VCA circuit
1 115,90 zł
Two full ADSR EGs, two unique LFOs with plenty of features just in 10HP!
960,20 zł
Feature-rich five stage envelope generator. Use it with Black EG CV Expander to add more versatility
1 002,45 zł
High quality audio mixer with three independently buffered inputs. This eliminates even the slightest interference between the signals before mixing
441,17 zł
Retro Gaming Inspired Gate and CV Sequencer
1 359,84 zł
OVERVIEW This small board allows you for either writing your own sound sets for the Piston Honda on EEPROMS or updating the firmware of older Harvestman modules. In addition you need a PicKit2 programmer, though.
168,68 zł
Build your own Shuffling Clock Multiplier, with the SCM kit. The Do-it-yourself kit includes all the parts necessary to build a fully-featured SCM. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).
413,14 zł
If You don't want scratches on Your modules , You'll need this!  ⌀  3M washers.
21,64 zł

Klienci którzy zakupili ten produkt kupili również:

Przejdź do góry