Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular



Brak w magazynie

Produkt PDF

Ocena(0 głosów)

Build your own Rotating Clock Divider Breakout, with the RCDBO kit. The Do-it-yourself kit includes all the parts necessary to build a fully-featured RCD Breakout. This is a beginner-level kit, you need only minimal prior experience, but you must have some basic hand tools (flush snips, needle-nose pliers, and a wire stripper).



Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

Brak w magazynie



Opis

    Features
    Divide-by-1 to Divide-by-64, on 8 output jacks
    CV Rotate jack to shift divide-by amount on each jack
    CV Reset jack to reset/re-sync all jacks
    Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting)
        Jacks
    Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
    CV Rotate (0V to +5V input)
    CV Reset (5V to 15V trigger)
    Divided Clock Outputs (8 jacks):
        Divide-by-(1+R)
        Divide-by-(2+R)
        Divide-by-(3+R)
        Divide-by-(4+R)
        Divide-by-(5+R)
        Divide-by-(6+R)
        Divide-by-(7+R)
        Divide-by-(8+R)
    ...where R is the CV Rotation.
    Selectable Gate/Trigger mode:
    Selectable Divide range up to Divide-by-64:
    Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
    Selectable Auto-reset:
    Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.

Kategorie: , , .