Dostępny na zamówienie
The RS-120 is quite an unusual filter because unlike other filters it cuts several notches into the audio signal which result in a comb-like look of the frequency spectrum. Soundwise it is perfectly suited to create phaser and flanger sounds
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL
Szybka dostawa kurierem lub paczkomatem
Darmowa dostawa do Polski od 500 PLN
Produkt dostępny na zamówienie
The filter is based on a bucket-brigade-device delay with very short times that clearly changes the phase of the signal. The feedback of this delay is used here as a resonance parameter that goes up to self-oscillation. There are two audio inputs with level control. Unity gain is reached at the pot´s position 4, beyond thsi point the filter will be overdriven. A control sets the delay time from 2.5ms to 25ms and in addition there are two CV inputs for controlling delay time, one with fixed 1V/oct and a variable one.
Usage with Eurorack:
/>Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
CV: one input with 1V/octave and one variable input with attenuator.
Audio: 2x signal input, 1x signal output
3U module in Analogue Systems form factor, 12HP wide, 64mm deep
power consumption: 10mA
The module needs a +5V operational voltage.
Weight 0.155 kg