Brak w magazynie
Zobacz ten produkt w nowym sklepie
A true analog step sequencer with three rows of eight steps for generating control voltages and trigger signals. The RS-200 impresses with an internal, voltage controllable clock generator, portamento, reset start/stop functions and a voltage influenced skip feature
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL
Szybka dostawa kurierem lub paczkomatem
Darmowa dostawa do Polski od 500 PLN
Brak w magazynie
Each of the three rows A, B and C has eight potentiometers for setting the voltage for each step plus a range potentiometer that sets the maximum possible output voltage between 1 and 10V (read: 1-10 octaves). Row C has in addition a slew parameter, smoothing the abrupt voltage changes between steps - a classic portamento up to 1 second length.
The section below has a number of switches for generating triggers
The Trigger-switches generate a trigger for each step: in upper switch position a trigger will be output for the according step at the "Trig Out 1" socket. Middle position = off. Bottom position = trigger at "Trig Out 2". The output "Trig Out 3" generates triggers at each step, no matter which position the switches are.
The eight RESET/RUN/SKIP switches activate per step a certain global function:
Reset: sets the sequencer back to step 1, this is used to shorten the sequence.
Run: step will be played normally
Skip: this step will be skipped and the sequencer proceeds directly from the previous step to the next one. The skip function will change though when a CV is applied to the Skip In at the right hand section (see below)
A control voltage ranging from 1V to 10V at the Skip input will modify the behaviour of a skipped step. Instead of being skipped, the CV will be held as long as it is removed or if it falls below 1V.
A reset button and a reset socket are used for external resetting of the sequencer. Another button and a trigger input start and stop the sequencer. After finishing each sequence cycle a trigger will be generated at the "End Pulse Out" socket.
The RS200 features an integrated, voltage controllable clock generator; its clock is available at a socket and can be used for synchronising other devices. Alternatively you can apply an external clock. A switch selects the clock source: upper position = external clock, bottom position = internal clock, middle position = proceed to the next step by hitting the STEP button.
Ext. Clock input
Ext. Reset input
Ext. Start/Stop input
CV output A
CV output B
CV output C
Trigger output 1
Trigger output 2
Trigger output 3
End Pulse output