Dostępny na zamówienie
High-quality joystick controller with two outputs and one attenuator per axis
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL
Produkt dostępny na zamówienie
The joystick is self-centering but the springs can be removed if desired. Each axis has a voltage range from -5V to +5V, the range potentiometers act as attenuators. Each axis of the joystick has two outputs.
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
Two voltage outputs per axis
3U Analogue Systems module, 12HP wide, 42mm deep
20mA power consumption
Weight 0.2 kg