Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular

Brak w magazynie

Zobacz ten produkt w nowym sklepie

Produkt PDF

Ocena(0 głosów)

This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or 'cinch') at channels 3 and 4

Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

Brak w magazynie


Usage with Eurorack: />Analogue Systems' modules are designed solely for use in cases and cabinets made by Analogue Systems. Through the use of adaptors or
adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack
case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer. />        Connectors
Channels 1 and 2: 6.35mm jack (1/4") and 3.5mm jack (1/8")
Channels 3 and 4: 6.35mm jack (1/4"), 3.5mm jack (1/8") and RCA
3U Analogue Systems module, 12HP wide, 25mm deep
passive module = no power consumption
Weight 0.088 kg

Kategorie: , , , , , .