Dostępny na zamówienie

RS-295 expands the RS-290 sampler/delay by a MIDI interface and a second assignable controller

Metody płatności
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

Produkt dostępny na zamówienie



Opis

Using the RS295 samples can be dumped and retrieved using SysEx dumps. The module is connected to the RS-290 by a flat ribbon cable. See RS-290´s operation manual.
        Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and
cabinets made by Analogue Systems. Through the use of adaptors or
adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack
case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
        Connectors
MIDI In, MIDI Out
3.5mm In for assignable controller
        Dimensions
3U Analogue Systems module, 6HP wide, 20mm deep
Current draw max. 70mA; module is powered via the RS-290
Weight 0.162 kg