Dostępny na zamówienie
The RS-350 is a voltage controlled Slew Limiter that can be swithced on or off by a positive going gate signal which simplifies creation of TB303-like sequences
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL
Produkt dostępny na zamówienie
The signal at the V-in socket will be passed to a slew limiter circuitry and also looped through to the buffered jack V-Out. The slew limiter delays rapid voltage changes and smoothens them.
A frequent use is creating portamento. You can also create A/D-envelopes with the limitation that both the rise and fall times are equal.
The amount of slew can be controlled manually and per voltage. The
processed signal is present at the buffered outputs Slew Out A and Slew Out B.
Usage with Eurorack:
Analogue Systems' modules are designed solely for use in cases and
cabinets made by Analogue Systems. Through the use of adaptors or
adaptor cables, however, it is possible to connect them to Eurorack cases.
Should you chose to use an Analogue Systems module in an Eurorack
case, please note that the warranties are thus void and the use occurs at your own risk! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
Signal input V-In, looped-through signal output V-Out
Slew Limiter outputs: Slew Out A und B
CV input and On/Off input
3U Analoge Systems module, 6HP wide
20mA power consumption
Weight 0.083 kg