Dostępny w magazynie

Mr Fill Gates is a step sequencer with 16 steps for Bass Drum, Hi Hat, Snare, etc.

The focus is on quick sequencing. You can shorten the length on the fly with switches. Mr Fill Gates has reset inputs and a manual reset with 5v output to reset other gear.

Metody płatności
Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

2 w magazynie



Opis

  • 16 Step On/Off Switches
  • Clock In/Out/Thru
  • Reset In/Out/Thru + Manual Button
  • Switches for changing length of sequence are great for performance

    This module requires an external module to supply a clock signal. You normally use a vco or lfo forexample. You can use a square wave or pulse wave.Once you patch a clock source you will see the led’s step in sequence, and the bottom led blink to thespeed of the clock.Initial setup is as follows: Have all the switches in the up position. For the 16 step sequencer switches,up is ‘off’ and down is ‘on’.If you wish to activate a gate signal, simple toggle down. Operation is straight forward.The toggle switches on the left allow you to shorten the sequence by 12, 8, and 4 steps. The label on thepanel refers to when the step will send a reset, so for example looping a 4 step sequence is labeled ‘step5’. You can also manually reset the sequence by using the push button. You can also patch into the‘reset’ jack to automate the reset function by an external module. The ‘thru’ jack allows you to pass thepatch cable to the next Mr fill gates module for easy multi syncing of all your sequencer tracks.You get two gate outputs. These outputs can be patched to envelope generators, bass drum moduleslike the asteroid BD v4, or directly to another module’s cv input.