Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular



Kategorie: , , .

Dostępny na zamówienie

Produkt PDF

Ocena(0 głosów)

This is the 3U version of the low cost cases A-100LC6/LC9. The A-100LC3 is very similar to the A-100LC6 but offers only one row with 84 HP for installation of modules



Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

Produkt dostępny na zamówienie



Opis

Doepfer A-100LC3 Low Cost Case, one row with 84 HP for installation of modules, incl. external Power Supply (1200mA) and bus board, Dimensions: approx. 445 x 150 x 160 mm (WxHxD)
A-100LC3 is equipped with one power supply (1200mA) and one bus board. Because of the limited space the power suppy of the DIY-Kit #1 with an external transformer is used (same as for the DIY-Kit #1). At the left side of the case the connector for the external transformer is located. The external transformer is not shown in the pictures.
The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can .
        Measures:
Outside: approx. 445 (width) x 160 (depth) x 150 (height)
Inside: 1 x 84 HP x 3 U (one bus board), useable depth for A-100 modules: approx. 110 mm (measured from inner side of the front panel until end of the pc board of the module)
Weight (without modules): about 2.5 kg without external transformer, about 3.5 kg with external transformer
        Electrical specifications:
Mains voltage: 115V~ or 230V~ (please specify when you order)
Output voltages/current: +12V/1200mA, -12V/1200mA

Kategorie: , , .