Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular



Dostępny w magazynie

Produkt PDF

Ocena(0 głosów)

Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches


Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

2 w magazynie (może być zamówiony)



Opis

Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches Features of the analog rows (knobs): - 8 potentiometers (knobs) - lower row: Scale (knob), upper row: 1V/2V/4V (octave range switch for exact VCO control) - Glide time (knob), same as portamento or slew limiter - Glide Control (control input for switching glide on/off) - S/H Control (control input for internal S and H, works like A-148) - Pre Glide/S and H-Out (analog output before S/H and glide unit, especially required when external audio signals are used as inputs of the lower row) - Post Glide/S and H-Out (analog output after S/H and glide unit) - lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators Features of the trigger rows (switches): - 4 Trigger/Gate tracks with 2 rows of switches - toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position) - 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal) - 1 gate row (i.e. a high signal is applied during the length of the step set) Control inputs and buttons: - Step (defines the tempo of the sequence, same as clock or trigger input) - Reset (resets all rows to step 1) - Start (starts the sequence at the momentary position) - Stop (stops the sequence at the momentary position) Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. The quantizing module A-156 can be used to quantize the infinite analog voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence. The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).          technical details Width: 50HP Connections: 3x Trigger outputs 1x Gate output 2x Pre outputs 2x Post outputs 2x S&H Ctrl. 2x Glide Ctrl. 8x External CV/Audio inputs Start input Stop input Clock input Reset input
Kategorie: , , , , .