Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular

Brak w magazynie

Produkt PDF

Ocena(0 głosów)

As the Dark Energy (I) had to be discontinued because an important electronic part (CEM3394) is no longer available we decided to do a redesign of the Dark Energy. The new Dark Energy II looks like the Dark Energy I at first sight. But the basic sound of Dark Energy II is clearly different from version I because of the new circuits for VCO, VCF and VCA

Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

Produkt dostępny na zamówienie


Dark Energy II is a monophonic stand-alone synthesizer with USB and Midi interface. The sound generation and all modulation sources are 100% analog, only the USB/Midi interface contains digital components. Dark Energy is built into a rugged black metal case with wooden side plates. High quality potentiometers with metal shafts are used and each potentiometer - except the filter mode control - is fixed to the case (no wobbly shafts and knobs).
The distance between the controls is a bit wider compared to A-100 modules and knobs with vintage look are used. In/Outputs (all monophonic 3.5 mm jack sockets, except USB, Midi and power supply)
        front panel:
CV In VCO frequency (1V/oct)
CV In VCO pulsewidth (about 5V range for full scale)
CV In VCF frequency (~ 1V/oct)
CV In VCA amplitude (0...+5V)
Gate In (0/+5...12V)
External Audio In (typ. 1Vss without distortion)
inverted LFO1 Out (~ -2.5 ... +2.5V)
Envelope Out (~ 0 ... +6V)
Audio Out (line output, typ. 1Vss, monophonic)
        rear panel:
Midi In
Learn button
Gate Out (with LED for Gate display and learn function), 0/+5V

               power supply (12...15V AC, min. 400mA)
        internal connections
Midi out (pin header with 2 pins for internal routing of the Midi signal to another Dark Energy)
Midi in (pin header with 2 pins for internal routing of the Midi signal from another Dark Energy)
        By means of this internal connections several Dark Energy devices can be daisy-chained. Only the first device has to be connected to the Midi or USB transmitter. For this purpose the side plates of the metal case are equipped with holes that allow the internal connection of 2 or more Dark Energy devices. For this the metal cases have to be mounted directly to each other without wooden sideplate between the units. If a wooden side plate is desired between the devices one has to drill a hole to enable the
internal connection.

Kategorie: , , , .