Mode.M Modular Shop

Follow @mode_modular Tweets by mode_modular

Dostępny w magazynie

Zobacz ten produkt w nowym sklepie

Produkt PDF

Ocena(0 głosów)

Trogotronic - m277 High-Gain Vacuum Tube Stereo VCA - Attention: This module requires power on the +5V rail! Make sure you have a power supply that provides power for it or buy the related adapters!

Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

   Szybka dostawa kurierem lub paczkomatem

   miesiące gwarancji

   Darmowa dostawa do Polski od 500 PLN

4 w magazynie


Before Wendys were Walters “and ships were made of wood” as the saying goes… Or put another way—when Bobs & Dons were Raymonds &Laurens: the synths were wrought of glowing glass tubes and VCAs shaped the sound as well ascontrolled it. Trogotronic issued m277 high-gain Vacuum Tube Stereo VCA without sonic compromise. Tube Harmonics, Bass-Heavy Compression & Stereo Imaging are applied with 2 Discrete High-Voltage VCA Circuits. The new v4 m277 is entirely redesigned delivering higher voltage, dead-quiet crystalline performance directly from your euro-rack power supply. m277 Tube Analog VCA delivers:
  • 2 Tube VCAs
  • 2 CV Amplitude Inputs with Attenuator Knobs (1 per channel)
  • 2 CV Drive Inputs with Attenuator Knobs (1 per channel)
  • 1 CV Master Panning Input & Manual Knob Control
  • 1 CV Master Panning-Drive Input & Manual Knob Control
  • Ample gain for use as a Stereo External Input Preamplifier
  • Zero to +5 volt CV-Range compatible w/most LFOs, Envelopes etc.
  • Warm Tube-Harmonics
  • Compression with Low-End Enhancement
  • Compelling Stereo Imaging
  • Pannable Stereo High-Gain Tube-Overdrive Effect
  • Warms cold digital effects & low-voltage solid-state signals
  • Optional High-Current Power Supply = low impact on your rack’s “built-in” supply
  • 4 CV Lamps: 2 Blue (Amplitude A & B) / 2 Red (Drive A & B)
  • 2 Slovakian Max. Gain, Twin-Triode Vacuum Tube run at high-voltage
  • Plug & Play Compatible w/ Alternate Tubes for Auxiliary Sonic Profiles
Demand on the +12v tap is 720mA for the first 10 seconds of warm up. Too much demand on rack’s available current? Being of a thrifty subhuman stock we made sure to continue offering an optional auxiliary supply which takes ALL current demand off of your rack’s +12v rail rendering a ZEROmA load on this rail when implemented! Use at the end of a patch: Rich tube harmonics & brawny compressed low-end add warmth to your cold digital effects / signals while reinforcing plastic sounding low voltage analog sound. Use to portray mono signals as vast stereo audio panoramas: The 2 discrete channels run in parallel add depth to mono signals with organic stereo imaging built into the circuit. The same mono signal can be dynamically panned & effected via the Pan CV Input & corresponding knob control. Use as a stereo overdrive effect: The Drive CV inputs are discrete (1 for each channel independent of the other) enabling the module to be used as 2 separate CV controlled tube overdrive effects. The Pan Drive CV Input / Control makes the creation of dynamically panning stereo overdrive effects via CV Drive a cinch. Use as external input stereo preamplifier: Gain afforded by the 277 is more than adequate to make even the tiny signal of a guitar or microphone patched comparable with modular line levels. Specs:
  • Euro-Format
  • 15HP
  • Depth 2.25″
  • +12v rail Startup peak current 720ma; avg. 390ma  (0mA w/optional Aux. Supply)
  • -12v rail peak current 3ma
  • +5v rail peak current 22ma
  • 12vDC Aux. Power Supply: Optional
Kategorie: , , , , , .